Home > Article > Content

How to check the engine of a used loader?

Jun 18, 2025

Hey there! I'm a supplier of used loaders, and I know how important it is to check the engine of a used loader before making a purchase. In this blog, I'll share some tips on how to do just that.

Why Checking the Engine is Crucial

The engine is the heart of a loader. A bad engine can lead to all sorts of problems, from frequent breakdowns to high repair costs. So, taking the time to thoroughly check the engine can save you a lot of headaches and money in the long run.

Visual Inspection

First things first, start with a visual inspection. Pop the hood and take a good look at the engine. Look for any signs of leaks, such as oil or coolant stains on the engine block or on the ground beneath the loader. Leaks can indicate worn seals or gaskets, which can lead to bigger problems if not addressed.

Check the hoses and belts. Look for cracks, fraying, or signs of excessive wear. A broken hose or belt can cause the engine to overheat or stop working altogether. Make sure all the connections are tight and there are no loose wires.

Check the Oil

The oil is like the blood of the engine. It lubricates the moving parts and helps keep the engine cool. Check the oil level using the dipstick. The oil should be at the proper level, and it should look clean. If the oil is dirty or has a milky appearance, it could be a sign of coolant mixing with the oil, which is a serious problem.

You can also smell the oil. If it has a burnt smell, it might mean the engine is overheating or the oil hasn't been changed regularly.

second hand 5t lovolLovol FL956f

Inspect the Air Filter

A clean air filter is essential for the engine to run properly. A dirty air filter can restrict airflow to the engine, reducing its performance and fuel efficiency. Remove the air filter and check it for dirt and debris. If it's very dirty, it might need to be replaced.

Listen to the Engine

Start the engine and listen carefully. A healthy engine should run smoothly without any strange noises. Knocking, rattling, or hissing sounds can indicate problems. For example, a knocking sound could be a sign of worn bearings, while a hissing sound might mean there's a leak in the intake or exhaust system.

Let the engine idle for a few minutes and observe how it behaves. Does it rev smoothly when you press the accelerator? Does it stall or hesitate? Any irregularities in the engine's performance should be a red flag.

Check the Cooling System

The cooling system is responsible for keeping the engine at the right temperature. Check the coolant level in the radiator. The coolant should be at the proper level, and it should be clean. Look for any signs of corrosion or sediment in the coolant.

Inspect the radiator and the hoses for leaks or damage. A damaged radiator or hose can cause the engine to overheat, which can lead to serious engine damage.

Look at the Exhaust

Take a look at the exhaust pipe. The exhaust should be clear or have a slight white vapor, especially when the engine is cold. If the exhaust is black, it could mean the engine is running rich (too much fuel and not enough air). A blue or gray exhaust could indicate oil burning, which is a sign of worn piston rings or valve seals.

Check the Engine's History

If possible, get the engine's maintenance history. This can tell you a lot about how well the engine has been taken care of. Regular oil changes, tune - ups, and other maintenance tasks are a good sign. On the other hand, if there's little or no maintenance history, it could be a risky purchase.

Test Drive

If you can, take the loader for a test drive. This will give you a better feel for how the engine performs under real - world conditions. Pay attention to how the engine accelerates, decelerates, and how it handles different loads.

Our 5Ton FL956F Wheelloader

If you're in the market for a used loader, I'd like to recommend our 5Ton FL956F wheelloader. It's a great machine with a reliable engine. We've thoroughly checked and serviced all the engines of our used loaders, including the 5Ton FL956F, to ensure they're in top - notch condition.

Conclusion

Checking the engine of a used loader is a multi - step process that requires careful attention to detail. By following these tips, you can make a more informed decision when buying a used loader. If you have any questions or are interested in purchasing a used loader, don't hesitate to reach out to us. We're here to help you find the perfect loader for your needs.

References

  • Loader maintenance manuals
  • Industry experience and knowledge

So, if you're thinking about buying a used loader, give us a shout, and we can discuss your options further.

Send Inquiry
James Miller
James Miller
James is a sales representative at Fujian Raygoo Machinery Co., Ltd. He is good at understanding customer needs and providing suitable product solutions. His strong sales skills have contributed to the company's continuous growth in the international market.